Home > News > Content
Why Do You Want To Check And Maintain Cooling Tower Parts
Sep 08, 2017

Why do you want to check and maintain Cooling Tower Parts
Cooling Tower Parts Why Check:
1, Cooling Tower Parts can be fully connected with the full load, will directly affect the output value of the factory and production safety. Whether the cooling towers of the thermal power plant can work well in summer is a necessary condition for full power generation and safe generation. Only the Cooling Tower Parts has enough cooling to provide sufficient cooling water to the condenser of the turbo-generator unit to ensure the necessary vacuum of the condenser, thus ensuring that the turbine generator set must limit power generation and even stop To prevent the occurrence of serious damage to the turbine generator.
2, Cooling Tower Parts can achieve the efficiency of the plant is the impact of production economy is an important measure. In the thermal power plant, Cooling Tower Parts to achieve efficiency should be saving energy, saving energy, reduce power generation costs an important measure. The lower the temperature of the cooling water, the lower the steam temperature after the steam work, so that the greater the power of the steam, the effective utilization rate increases accordingly. The theoretical analysis shows that the improvement of the thermal efficiency of the power station is proportional to the decrease of the circulating water temperature. For the medium pressure unit with coal and oil as the fuel, the cooling water temperature can be reduced by one degree Celsius and the thermal efficiency can be improved.
Second, the maintenance and maintenance of Cooling Tower Parts:
1, fan maintenance: the screw is tightened, whether the angle changes, the blade surface appears uneven attachment or cracking or peeling. Found that the above problems should be shut down in time. Clean up or repair.
2, check the reducer drive situation: the normal operation of the case, the gear cooling gear Cooling Tower Parts required for each year for a gear oil, belt reducer drive Cooling Tower Parts every year, replace the bearings.
3, oil level inspection: the tubing connection, due to long-term vibration should pay attention to the oil standard and the loose joints. Oil oil cracked or broken out of the abnormal situation, so as not to make serious oil leakage.
4, the motor overhaul: the motor should check the bearing and insulation, the general one year wash and wash once, and add grease, such as the motor bearing abnormalities, should be promptly open swap.
5, packing inspection: check whether the formation of clean, whether there is scaling, generally no serious impact can be dealt with slightly. Such as a serious impact on cold efficiency, it should be targeted water treatment. If the filler is aged, the packing should be replaced completely.
6, steel stent corrosion: tower steel stent corrosion coated with anti-rust paint, but should pay attention to abnormal force and deformation. If the motor reducer support frame is damaged and the packing support is deformed due to the fouling of the packing, the maintenance personnel should be informed.
7, glass steel parts and tower maintenance: once a year to clean the shell, adjust due to external or fixed deformation caused. The appearance of the FRP structure fades with the increase in service age. Waxing and other forms of sub-device bright.
8, cloth water system maintenance: pay attention to the water dispenser is normal, should be carefully checked for each cloth pipe and cloth water angle, to ensure that the water distribution device is flexible.
9, leak: maintenance. Disassembly and piping connection process, will be Cooling Tower Parts local parts and the installation of loose surface caused by leakage. At this point, you should first clean the bonding surface, and then use glass glue or resin and glass fiber cloth trap.
 Industrial production or refrigeration process in the waste heat generated by the general use of cooling water to guide away. From the river, river, lake, sea and other natural water to absorb a certain amount of water as cooling water, cooling technology equipment to absorb waste heat to water temperature, and then into the river, river, lake, sea, this cooling method known as DC cooling The When you do not have DC cooling conditions, you need to use Cooling Tower Parts to cool.
Cooling Tower Parts the role of the equivalent of ordinary household air-conditioning outdoor unit heat exchanger, is used to heat the equipment.
For the water-cooled central air-conditioning water, the condensation side is the water pump through the pipeline to remove the water inside the condenser heat, the water to take away the heat inside the condenser, the role of the pump into the cooling tower Parts , Passing the water in the Cooling Tower Parts and then passing the heat to the air around the Cooling Tower Parts and then re-entering the central air conditioning condenser to absorb heat.
Water-cooled central air-conditioning system Cooling Tower Parts equivalent to ordinary household air-conditioning outdoor unit on the condenser, the pump is equivalent to ordinary household air-conditioning outdoor unit fan motor, only by a heat exchanger into a secondary heat exchange only.
Water-cooled central air conditioning cooling water system Because it is open system, water quality is very easy to become poor, need to regularly clean the pipeline, regular replacement of cooling water.