Home > News > Content
How To Choose The Right Cooling Tower Installation Location?
Jun 25, 2018

1. Usually, the cooling towers in the factory are installed on the roof or other building grounds with sufficient carrying capacity. This is because it has good ventilation effect and can better help cooling towers to dissipate heat.

Note: When installing, the shortest distance between the inlet of the cooling tower and the building should not be less than 1.5 times the outer diameter of the tower body. This can meet the requirement that the new wind enters the tower unimpeded and avoid installation inside the unventilated high wall;

2. When a cooling tower cannot meet production requirements, more cooling towers need to be installed. At this time, attention must be paid to the spacing between each cooling tower to ensure smooth ventilation.

3, the choice of cooling tower installation location, we must pay attention to whether there are soot or dust around the place, to avoid installation in these places, to prevent the film was blocked by soot and other dust;

4. When installing, if there is a hot place such as a kitchen or other boiler room, you should re-select the address. These places are prone to generate heat, resulting in cooling tower itself cooling and poor cooling.