Home > Exhibition > Content
How to properly use the plate cooler?
Nov 14, 2016

With the development of modern industrial processes, heat supply, ship, electric power, metallurgy, chemical industry, textile and other sectors needed, plate cooler can be used for heating, cooling, evaporation, sterilization and disinfection, waste heat recovery, and other conditions. The plate cooler installation method, do you know? Below we detail summary introduction:

1, first of all, where to install the plate cooler to reserve certain sites around.

2, installation of piping to connect before cleaning to avoid gravel, oil, slag and other debris into the plate cooler, resulting in flow obstruction or damage the plate. Plate cooler itself covers an area of small, light weight, apart from the size of the device itself, and do not need to set aside an additional inspection and installation space, heat exchanger with plate thickness of only 0. 6~0. 8mm。

3, note the open plate cooler, shutdown order. When the power valves open the low voltage side of medium, medium with channel plate heat exchanger and then slowly open high pressure side valve media; down, close valve high side media, then close the low voltage side of the media valve.

4, before using check all clamping bolt is loose, if any should be tightened.